6.57
(incl. VAT)
loading...
The EATON 24V front fixing contact element is a component typically used in electrical systems or devices. It is designed to provide a reliable and secure electrical connection in a front-facing orientation, making it easy to access and install. The "24V" indicates the operating voltage at which it can safely function. It is designed to handle a voltage of 24 volts, making it suitable for low to moderate power applications. The contact element is intended to be mounted or installed from the front of the device or system. This front-facing design allows for convenient installation and maintenance without requiring access from the rear. The contact element is likely made from a durable and conductive material, such as copper or a copper alloy, to ensure a reliable electrical connection. The specific configuration of the contact element may vary depending on the application. It could be a pin, socket, or a combination of both, allowing it to mate with corresponding connectors. The front fixing contact element is designed to be easily mounted on a PCB (Printed Circuit Board) or another surface using appropriate fixing mechanisms like screws, clips, or latches.<br>
The contact element would have a specified current rating, indicating the maximum current it can safely carry without overheating or causing damage. The 24V front fixing contact element might be used in various electronic devices, industrial control systems, power distribution equipment, automotive applications, or wherever a reliable electrical connection at 24 volts is required.
Length: The contact element has 38 millimetre length.<br>
Height: The contact element has 10 millimetre height.<br>
Width: The contact element has 32 millimetre width.<br>
Weight: The contact element weighs 0.01 kilogram.<br>
Amperage rating: The contact element has 3A amperage rating.
Easy Installation: The front fixing design allows for straightforward and convenient installation, as it can be mounted from the front of the device or system. This ease of installation reduces assembly time and simplifies maintenance tasks.<br>
Accessibility: Front fixing contact elements provide easy access for maintenance or replacement without the need to disassemble the entire system. This accessibility can save time and effort during repairs or upgrades.<br>
Reliable Electrical Connection: These contact elements are designed to establish a secure and reliable electrical connection. The use of high-quality conductive materials ensures low resistance, minimal signal loss, and reduced risk of intermittent connections.<br>
Space-Efficient: Front fixing contact elements are often compact in design, making them suitable for applications with limited space. They can be densely packed on a PCB or in tight spaces within electronic devices.<br>
Versatility: These contact elements can be used in a wide range of applications, thanks to their compatibility with various connectors and systems. They find use in electronics, automotive, industrial control, and other fields where a 24V connection is required.<br>
Reduced Risk of Damage: Front fixing elements are mounted securely on the front side of the PCB or housing, reducing the risk of damage during handling or transport compared to rear-mounting alternatives.<br>
Lower Error Rates: The ease of installation and clear visibility during mounting can result in lower error rates during assembly, reducing the chances of misconnections or wiring mistakes.<br>
Enhanced Safety Features: Depending on the specific design and application, front fixing contact elements may include safety features such as insulation and shielding to prevent accidental contact and ensure operator safety.<br>
Improved Serviceability: The front-facing orientation of these elements allows for faster troubleshooting and maintenance, contributing to improved overall system serviceability.<br>
Compatibility with Standard Connectors: Front fixing contact elements are often designed to work with widely adopted connector standards, making them readily available and compatible with various off-the-shelf connectors.
The EATON 24V front fixing contact element is a component typically used in electrical systems or devices. It is designed to provide a reliable and secure electrical connection in a front-facing orientation, making it easy to access and install. The "24V" indicates the operating voltage at which it can safely function. It is designed to handle a voltage of 24 volts, making it suitable for low to moderate power applications. The contact element is intended to be mounted or installed from the front of the device or system. This front-facing design allows for convenient installation and maintenance without requiring access from the rear. The contact element is likely made from a durable and conductive material, such as copper or a copper alloy, to ensure a reliable electrical connection. The specific configuration of the contact element may vary depending on the application. It could be a pin, socket, or a combination of both, allowing it to mate with corresponding connectors. The front fixing contact element is designed to be easily mounted on a PCB (Printed Circuit Board) or another surface using appropriate fixing mechanisms like screws, clips, or latches.<br>
The contact element would have a specified current rating, indicating the maximum current it can safely carry without overheating or causing damage. The 24V front fixing contact element might be used in various electronic devices, industrial control systems, power distribution equipment, automotive applications, or wherever a reliable electrical connection at 24 volts is required.