Loading...
Top Categories
Top Sellers
Customer Service
21.6
21.6
(incl. VAT)
Colors:
loading...
Product Overview
- Surfaces must be clean, dry and free of dirt, grease, oil or water.
- Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or detergent.
- For a neat finish, apply masking tape and remove it before sealant skins over.
- Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.
Technical Specifications
- Surfaces must be clean, dry and free of dirt, grease, oil or water.
- Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or detergent.
- For a neat finish, apply masking tape and remove it before sealant skins over.
- Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.