Loading...
Top Categories
Top Sellers
Customer Service
34.3
34.3
(incl. VAT)
Colors:
loading...
Product Overview
- Surfaces must be clean, dry and free of dirt, grease, oil or water.
- Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or detergent.
- For a neat finishing, apply masking tape and remove it before sealant skins over.
- Cut the tip off and puncture the internal foil seal with the nozzle. Cut the nozzle at 45° angle to desired bead-width and apply the sealant to substrate with a cartridge gun.
Technical Specifications
- Surfaces must be clean, dry and free of dirt, grease, oil or water.
- Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or detergent.
- For a neat finishing, apply masking tape and remove it before sealant skins over.
- Cut the tip off and puncture the internal foil seal with the nozzle. Cut the nozzle at 45° angle to desired bead-width and apply the sealant to substrate with a cartridge gun.